dimensions MCSO1ELS low consumption 32.768 khz t range up to 200c sc cut quartz crystal recommended solder pad: all dimensions in mm typical electrical characteristics at +25c frequency stability over temperature range r = -10 to +150c (see ordering info) including 2)* f/f 50 ppm frequency stability over temperature range s = -10 to +175c (see ordering info) including 2)* f/f 100 ppm frequency stability over temperature range t = -10 to +200c (see ordering info) including 2)* 3)* f/f 150 ppm supply voltage 5% 1)* vdd 2.5 / 3.3 / 5 v input current idd see table 1 output signal hc-mos compatible symmetry at vdd/2 40 / 60 % rise & fall time (load 15pf 20% to 80%) 25 ns level "0" & "1" <0.4>vdd-0.5 v start-up time t <5 ms load min / max 3/27 pf 100% leadfree, rohscompliant: description: this smd oscillator in ceramic package has been specially designed for surface mount using infrared, vapor phase or epoxy techniques. a pplications: - downhole and well drilling equipments - avionics - airbone equipments - geothermal equipments - fire fghter equipments the mcso1's are supplied on trays (91 pcs / tray) for pick-and-place equipment, the parts are available in 16mm tapes with 250 parts min 1000 parts max sc cut quartz crystal smt clock oscillator in ceramic package fundamental quartz mode frequency ultra low stability high shock and vibration resistance wide temperature range low aging ultra low msl very fast start-up excellent solderability swiss made quality customer specification on request 1 2 3 4 4 3 1 2 7,86 3,70 3,60 1,52 2,00 2 ,5 4 3 ,1 8 2 ,5 4 1,6 1,16 1,6 pin 1 e/d pin 2 gnd pin 3 fout pin 4 vdd package: bottom view * 1) c = 47nf ceramic must be connected between gnd & vdd operable over 2.3 to 5.5v * 2) adjustment at +25c, long term aging 1000h at tmax ordered over supply voltage 5% and over load min to max * 3) only available with supply voltage 5v frequency stability included 1000h at tmax
version 1.0/08.2015 micro crystal ag tel. +41 32 655 82 82 mhlestrasse 14 fax +41 32 655 82 83 ch-2540 grenchen sales@microcrystal.com switzerland www.microcrystal.com environmental characteristics: storage temp. range -65 to +125c vibration resistance 10 to 2000hz / 40g shocks resistance 10000g / 0.3ms / ? sine terminations and processing: refow soldering +260c / 10s max package ceramic 8 x 4 x 2mm lids (standard) kovar lids (on request) ceramic height 2.5mm type MCSO1ELSc terminations option t3 on request (not available on g temperature range) with tinned ag/cu/zn e/d option 1 on request reaction time ? 5ms pin 1 open pin 3 clock h clock l low product description and ordering information: all specifications subject to change without notice. frequency ?khz? 32.768 other frequencies on request standard frequencies: - no power e/d function (pin 1) before vdd is setting on - disable option (consumption 5a). c = ceramic lids blank = kovar lids w = vdd 2.5v v = vdd 3.3v blank = vdd 5v r = -10 to 150c s = -10 to 175c t = -10 to 200c x = custom frequency option 1 e/d enable / disable option 2 blank au plasted t3 = tinned customer spec n MCSO1ELS c v - s 32khz e/d t3 xxx t able 1: idd (with load 10pf) frequency f=32 khz w=vdd = 2.5v < 100a v=vdd = 3.3v < 110a blank=vdd = 5v < 120a a unique part number will be generated for each product specifcation: i.e: 20xxxx-ea00 xxx pcs ( in esd plastic tray) 200xxx-ml00 xxx pcs ( in tape & reel, any quantity)
|
